Separation of mixed metals: dry separation tables generally consist of two outlets. The front outlet for materials with a higher density or specific weight, the rear outlet for materials with a lower density or specific weight. Two-way dry separation tables are very useful in separating materials or streams of materials consisting mainly of two materials; this is the case of electrical cables and wires where the separation occurs between the insulating fraction, generally of PVC or rubber, and the metal content consisting of copper or aluminum. Thanks to the difference in density, the densimetric tables are used for the recycling of copper and aluminum radiators. Stokkermill has been designing and manufacturing densimetric separation systems for more than twenty years,and has been achieving extraordinary results. In order to separate two materials with different densities, our separation tables are congruent with all the functions such as vibrating systems with an inverter to adjust the airflow.
Multiple densimetric separation tables for metals Stokkermill with multiple outlets represent a significant technological improvement for separation systems. Densimetric tables with multiple outlets, up to ten in standard models, however, it can be customized depending on the customer’s needs. Dry separation tables are suitable for the separation of metals and mixed materials of different specific weights and densities. The multiple output densimetric separators allow the separation of more complex materials and are particularly suited to the recovery and recycling of waste and electrical and electronic waste, to the recovery of WEEE, to the recycling and separation of copper and aluminum cables, to armored cables and, more generally, where more advanced and efficient separation solutions are required.
The separation tables with multiple outlets can be managed by an electronic control system that allows different programming and operating modes to solve more complex separation problems and can be connected to a centralized remote control system SDC for continuous monitoring of operational performance. Densimetric separators are eco-friendly machines, required low-energy consumption, do not produce polluting waste, do not pollute the water and are not harmful to the environment. The dry separators are made in a modular way and allow you to obtain from a minimum of four to a maximum of ten outlets with variable capacities according to the specific needs of the end-user. For further details on Stokkermill multiple outlet separators , do not hesitate to contact us at info@stokkermill.com or see the technical datasheet.
